Technical Specifications of Vigor2950 |
| Hardware Interface |
LAN |
Maximum 5-port 10/100/1000 Base-TX Switch |
| WAN |
2-port 10/100 Base-TX Ethernet |
| Dual-WAN |
Outbound Policy-Based Load-Balance |
| BoD ( Bandwidth on Demand ) |
| WAN Connection Fail-over |
| WAN Protocol |
DHCP Client |
| Static IP |
| PPPoE |
| PPTP |
| BPA |
| L2TP* |
| Firewall |
SPI ( Stateful Packet Inspection ) |
| CSM (Content Security Management) for IM / P2P Application |
| Multi-NAT, DMZ Host, Port-Redirection / Open Port |
| Policy-Based IP Packet Filter |
| DoS/DDoS Protection |
| IP Address Anti-Spoofing |
| E-Mail Alert and Logging via Syslog |
| Bind IP to MAC Address |
| VPN |
Up to 200 VPN Tunnels |
| Protocol |
PPTP , IPSec , L2TP, L2TP over IPSec |
| Encryption |
MPPE |
| Hardware-Based AES / DES / 3DES |
| DHCP over IPSec |
| IKE Authentication : Pre-shared Key and Digital Signature (X.509) |
| NAT-Traversal ( NAT-T ) |
| Dead Peer Detection ( DPD ) |
| VPN Pass-Through |
| LAN to LAN / Teleworker to LAN |
| VPN Backup |
| VPN Load-balance |
| Bandwidth Management |
Class-Based Bandwidth Guarantee by User-Defined Traffic Categories |
| DiffServ Code Point Classifying |
| 4-level Priority for Each Direction ( Inbound / Outbound ) |
| Bandwidth Borrowed |
| Bandwidth/Session Limitation |
| Network Management |
Web-Based User Interface ( HTTP / HTTPS ) |
| Quick Start Wizard |
| CLI (Command Line Interface) / Telnet / SSH* |
| Administration Access Control |
| Configuration Backup / Restore |
| Built-in Diagnostic Function |
| Firmware Upgrade via TFTP / FTP / TR-069 |
| Logging via Syslog |
| SNMP Management with MIB-II |
| TR-069 |
| Content Filter |
URL Keyword Blocking (White list and Black list) |
| Java Applet, Cookies, Active X, Compressed / Executable / Multimedia File Blocking |
| Web Content Filter (SurfControl ) |
| Time Schedule Control |
| Network Features |
DHCP Client / Relay / Server |
| Dynamic DNS |
| NTP Client |
| Call Scheduling |
| RADIUS Client |
| DNS Cache/Proxy |
| UPnP |
| Port-Based VLAN |
| Routing Protocol |
Static Routing |
| RIP V2 |
| Temperature |
Operating : 0簞C ~ 45簞C |
| Storage : -25簞C ~ 70簞C |
| Humidity |
10% ~ 90% ( non-condensing ) |
| Max. Power |
22 Watt |
| Dimension |
L273 * W166 * H44.6 ( mm ) |
| Power |
AC 100~240V, 50/60Hz |